Speck-electronics SSM Bedienungsanleitung PDF herunterladen (Seite 58)

Chapter 5 Wiring and Other

All wire and cable interfaced to the Model SSM and Speck products

should be terminated with high quality connectors. A 1/4" plug or XL

connector should make a positive connection to its respective mating

jack and provide adequate strain relief to its cable. All connectors

should also have a metal shell to provide 100% shield for exposed

conductors.

Feel free to check with Speck Electronics or your dealer when selecting

cable and connectors. Our phone number is (760) 723-4281.

When you are evaluating voltage and current requirements for your

audio system, it is important that your SSM mixing system and/or rack

system does not exceed the capacity of your AC service. You should

make certain that the earth (green) wire for the AC system makes a

reliable earth connection, and determine as best as possible that the AC

system is free of noise that could generate unwanted audible sounds or

cause problems in microprocessor based equipment.

When using a larger rack system it is recommended that a dedicated and

isolated AC service be provided. This service should have its own AC

wires, isolated receptacle, and breaker and not be shared with other

unrelated equipment.

Even with an isolated AC system, it may still be necessary to make use

of surge protectors, line filters, isolation transformers, or all of the

above.

Power conditioners should be selected with care, since they sometimes

generate undesirable switching noises in audio systems.

When connecting many pieces of electronic equipment to an AC system

it is important that the AC is properly distributed. It is better to connect

all plugs to a common AC source than to have AC receptacles in

different locations.

When installing a large audio system, it may be necessary to consult a

qualified electrician that is familiar with the specialized style of

electrical wiring required for recording studios.

Connectors

Quality AC System

AC Distribution

CAUTION!

DO NOT REMOVE, DEFEAT, OR DISABLE THE

SAFETY EARTH TERMINAL ON THE POWER

CORD. DO NOT USE A GROUND LIFT ON THE

POWER SUPPLY.

Proper AC Grounding

1 2 ... 53 54 55 56 57 58 59 60 61

Keine Kommentare

Speck-electronics SSM Bedienungsanleitung Seite 58