Speck-electronics SSM Bedienungsanleitung PDF herunterladen (Seite 40)

Chapter 4 Operation Section

This feature of the SSM allows an external stereo cue source (otherwise

known as headphone or foldback) or any stereo line level signal to be

integrated into the SSM's monitor and/or headphone feeds. This makes

it possible to customize a balance between the SSM's stereo mix and, for

instance, the cue feed from a studio control room.

The Cue Return can be accessed via two unbalanced 1/4" phone type

jacks or via a transformer isolated XL type connector. For more on

these connections, see their rear panel descriptions. Since the source for

the Cue signal is most likely the high level output of a power amplifier

(via a dedicated headphone box), the input sensitivity of the Cue Return

has been adjusted accordingly.

Do not attempt to connect the speaker terminals of any power amplifier

directly into the Cue Returns of the SSM.

The stereo Cue Return Section includes the return level control, the

Return Pan Control, the return mute switch, and the return in-place solo

switch.

The Cue Return Control adjusts the level of an external stereo cue

source and returns only to the monitor master and/or the headphone

outs.

This control allows the Cue Return to be panned anywhere in the stereo

perspective.

This switch allows muting of the stereo cue return. Enabling this switch

removes the stereo cue return signal from the monitor and headphone

outputs. The operation of this switch does not affect the operation of the

aux or click returns.

Depressing this switch allows you to isolate the Cue Return to the

monitor and/or headphone outputs while maintaining stereo perspective.

Similar in operation to the Stereo Cue Section, the Click Return is

designed to allow an external mono click source (metronome type) or

any mono line level signal to be integrated into the SSM's monitor and/

or headphone outputs.

The Click Return can be accessed via a single 1/4" phone type jack or

via a balanced transformer isolated XL connector. For more on these

connections, see their rear panel descriptions.

Stereo Cue

Return Section

44. Cue Return Level Control

47. Cue In-Place Solo Switch

45. Cue Return Pan Control

46. Cue Mute Switch

Mono Click

Return Section

Refer to Figure 6 for location of items 44 thru 55.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Speck-electronics SSM Bedienungsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Speck-electronics SSM