Speck-electronics SSM Bedienungsanleitung PDF herunterladen (Seite 48)

Chapter 4 Operation Section

8. Tuner Feed Jack

Master Input/Output

Connections

This pushbutton switch selects the sensitivity of the left and right

Program VU meters; +4dbm operation in the normal (up) position, and -

18dbm operation when depressed. The operation of this switch in no

way modifies the electronic operation of the mixer.

If the switch is set to its normal (up) position, then a 0VU reading on the

meter indicates that a signal value of +4dbm is being yielded at the

program output. If the switch is depressed, then the meters become

22db more sensitive, thereby making it necessary, given the same input

levels, to turn down the Stereo Program Master Control to once again

achieve a 0VU meter reading. However, this same 0VU reading now

yields a signal value of -18dbm at the program outputs as a result of the

lower Program Master Control setting. This setting should prove

sufficiently low enough for the Microphone or Synth inputs of a

recording console.

As with the Program Meter Sensitivity Switch, this switch selects only

the sensitivity of the Solo/Effects VU meter and in no way modifies the

electronic operation of the mixer. The same two different operating

levels are available; +4dbm or -18dbm.

The 6 pin DIN connector provides a convenient interface to any passive

stereo volume pedal via an optional interface cable. This connector

provides a stereo send and stereo return insert for the stereo mix signal.

The left/right send to this connector is the sum of all input channels and

effects returns. The left/right returns are "Pre" the program, monitor and

headphone controls. This allows a "what you hear, is what you get"

adjustment when the expression pedal is operated.

This connector is only active when the Expression Pedal Switch is

enabled. The operation of the pedal does not affect the levels from the

cue, click, aux returns, and solo signal. For the pin assignment

configuration for the 6 pin DIN connector and installation instructions,

refer to the Interface Section of this manual.

This unbalanced 1/4" T.S. phone type jack provides a dedicated feed to

an external tuning device. The source for the output is either the sum of

all signals feeding the program master or any signal(s) that are soloed.

If, for example, you need to tune only one synth module while others are

active as well, simply depress its associated solo or PFL switch and it

will be isolated to the tuner output.

5. Left/Right Meter Sensitivity

Select Switch

6. Solo/Effects Meter Sensitivity

Select Switch

7. Expression Pedal Connector

Refer to Figure 9 for location of items 5 thru 15.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Speck-electronics SSM Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Speck-electronics SSM