Speck-electronics Xtramix Bedienungsanleitung PDF herunterladen (Seite 28)

19. Stereo Effects Return

Mono Switch

Depressing this switch sums the left and right effects inputs creating a

mono composite. This feature will prove useful if a stereo effect is to be

assigned to a single su/jointfilesconvert/1705819/bgroup or specifically placed somewhere in the

left to right perspective of a stereo su/jointfilesconvert/1705819/bgroup.

When the Su/jointfilesconvert/1705819/bgroup Assign Changeover Switch (see below) is in the up

position, then pressing the 1-2/5-6 Assign Switch routes the effects

return signal to the 1-2 su/jointfilesconvert/1705819/bgroup pair. When the Su/jointfilesconvert/1705819/bgroup Assign

Changeover Switch is in the down position, pressing the 1-2/5-6 Assign

Switch routes the effects return signal to the 5-6 su/jointfilesconvert/1705819/bgroup pair.

In the up position, all signal flow to the 1-2 or 5-6 su/jointfilesconvert/1705819/bgroups is

“Muted”.

When the Su/jointfilesconvert/1705819/bgroup Assign Changeover Switch (see below) is in the up

position, then pressing the 3-4/7-8 Assign Switch routes the effects

return signal to the 3-4 su/jointfilesconvert/1705819/bgroup pair. When the Su/jointfilesconvert/1705819/bgroup Assign

Changeover Switch is in the down position, pressing the 3-4/7-8 Assign

Switch routes the effects return signal to the 7-8 su/jointfilesconvert/1705819/bgroup pair.

In the up position, all signal flow to the 3-4 or 7-8 su/jointfilesconvert/1705819/bgroups is

“Muted”.

In the up position the Su/jointfilesconvert/1705819/bgroup Assign Switches will select su/jointfilesconvert/1705819/bgroups

1 thru 4. When depressed the Su/jointfilesconvert/1705819/bgroup Assign Switches will select

su/jointfilesconvert/1705819/bgroups 5 thru 8.

Depressing this switch allows you to isolate any effect return to the

Monitor and/or Headphone outputs while maintaining stereo

perspective. The source for the In-Place solo circuit is post (after) the

volume control. This allows you to solo multiple effects returns while

retaining their relative levels.

There are two types of In-Place solo incorporated into the Xtramix:

Absolute and True. The stereo effect return solos are True In-Place.

This means that the left/right perspective of a soloed effects return will

be affected by the position of the effects return Balance/Pan control.

Additionally, if a stereo effects device is connected to a return being

operated in the stereo mode, then soloing that channel yields a stereo

solo signal. If the return is set to operate in mono, then soloing that

channel will yield a mono solo signal.

The solo listening level can be controlled by either adjusting the Effects

Return Level Control, the Master Monitor or Headphone level, although

adjusting the Master Monitor or Headphone level will not affect any

relative balance created with the Return Level Control

This red LED illuminates any time its associated Effects Return Solo

Switch is depressed.

20. 1-2/5-6 Su/jointfilesconvert/1705819/bgroup Assign/

Mute Switch

21. 3-4/7-8 Su/jointfilesconvert/1705819/bgroup Assign/

Mute Switch

22. Assign Changeover Switch

23. Effects Return Solo Switch

24. Solo LED

Chapter 4 Operation Section

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Speck-electronics Xtramix Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Speck-electronics Xtramix